Once having decided the treatments to do between ISOMETRIC and DRAINING is possible to choose the number of channels to use. Pressing “Continue” the treatment starts and it is necessary to set the power,
this have to be done channel by channel, activating the one to set by pressing the button below next to the script active channel.

The power can be set only when the green square appears at the bottom on the left side of the display, as shown in the picture.
The power can be set only when the green square appears at the bottom on the left side of the display, as shown in the picture.

At the end, push next. The timer will automatically start, the screen shows the time left and the channel which is working in that moment, at the end of the time programmed, the treatment will switch off.